|
RSW - COMPLETE PRODUCTS LISTING - JUNE 2008
FAA-PMA - HAMILTON STANDARD PROPELLER REPLACEMENT PARTS
|
| REPLACES: |
RSW Part No. |
Part Description |
Applicability |
| 50003 |
C.P. 22026-2 |
Cylinder Gasket |
2D30 |
| 50004 |
C.P. 22028 |
Snap Ring (Cylinder Safety) |
2D30 |
| 50009 |
C.P. 22029 |
Snap Ring (Cylinder Safety) |
12D40, 3D40 |
| 50010 |
C.P. 22026-3 |
Cylinder Gasket |
12D40, 3D40, 2E40, 3E50 |
| 50048 |
C.P. 22118 |
Spider Ring (Phenolic) |
3D40 |
| 50115 |
C.P. 22024 |
Washer (Front Cone Packing) |
2B20 |
| 50117 |
C.P. 22026-1 |
Cylinder Gasket |
2B20 |
| 50285 |
See CP-22019-1 kit in STC section below |
Gasket, Piston (Inboard) |
2D30 |
| 50286 |
See CP-22019-2 kit in STC section below |
Gasket, Piston (Inboard) |
12D40, 3D40, 2E40, 3E50 |
| 50290 |
C.P. 22014-1 |
Counterweight Cap |
2D30, 3D40 |
| 50306 |
C.P. 22009 |
Counterweight Dowel Pin |
2D30/12D40 |
| 50307 |
C.P. 22010 |
Counterweight Dowel Pin |
2D30/12D40 |
| 50372 |
C.P. 22045-0 |
Bearing Spacer |
D Shank Blades |
| 50374 |
C.P. 22044-0 |
Bearing Spacer |
B Shank Blades |
| 50696 |
See CP-22019-2 kit in STC section below |
Nut, Piston Gasket |
12D40, 3D40, 2E40, 3E50 |
| 50697 |
See CP-22019-1 kit in STC section below |
Nut, Piston Gasket |
2D30 |
| 50791 |
C.P. 22030 |
Shim Plate |
2D30, 3D40 |
| 51035 |
C.P. 22007 |
Cylinder Liner (Steel) |
2D30 |
| 51037 |
C.P. 22008 |
Cylinder Liner (Steel) |
12D40, 3D40 |
| 51124 |
See CP-22000 kit in STC section below |
Bushing, Counterweight Bearing Shaft |
2D30, 12D40, 2E40, 3D40 |
| 51136 |
C.P. 22007B |
Cylinder Liner (Steel) |
2B20 |
| 51313 |
CP-22061 |
Blade Bushing |
2D30, 12D40, 3D40 |
| 51399 |
C.P. 22030 |
Shim Plate |
2D30, 12D40, 2E40, 3D40, 3E50 |
| 51420 |
C.P. 22121-1 |
Cylinder (complete w/ steel & phenolic liners) |
3D40 |
| 51420 |
C.P. 22121-2 |
Cylinder complete w/steel & phenolic liners, for STC Kit CP22000 |
3D40 |
| 51430 |
C.P. 22011-1 |
Counterweight Bracket (15 deg.) |
2D30, 12D40, 3D40 |
| 51430 |
C.P. 22011-2 |
Counterweight Bracket (15 deg.) |
2D30, 12D40, 3D40 |
| 51431 |
C.P. 22012-1 |
Counterweight |
2D30, 3D40 |
| 51431 |
C.P. 22012-2 |
Counterweight |
2D30, 3D40 |
| 51432 |
C.P. 22013-1 |
Counterweight |
12D40 |
| 51432 |
C.P. 22013-2 |
Counterweight |
12D40 |
| 51433 |
C.P. 22021-1 |
Cylinder (complete w/ steel & phenolic liners) |
12D40 |
| 51433 |
C.P. 22021-2 |
Cylinder complete w/steel & phenolic liners, for STC Kit CP22000 |
12D40 |
| 51462 |
C.P. 22036-1 |
Support Barrel (Phenolic) |
12D40 |
| 51462 |
C.P. 22036-2 |
Support Barrel (Phenolic) |
12D40 |
| 51463 |
C.P. 22035-1 |
Support Barrel (Phenolic) |
2D30 |
| 51463 |
C.P. 22035-2 |
Support Barrel (Phenolic) |
2D30 |
| 51464 |
C.P. 22034-1 |
Support Barrel (Phenolic) |
2B20 |
| 51464 |
C.P. 22034-2 |
Support Barrel (Phenolic) |
2B20 |
| 51539 |
C.P. 22020-1 |
Cylinder (complete w/ steel & phenolic liners) |
2D30 |
| 51539 |
C.P. 22020-2 |
Cylinder complete w/steel & phenolic liners, for STC Kit CP22000 |
2D30 |
| 51546 |
CP-22060 |
Blade Bushing |
2B20 |
| 51571 |
C.P. 22016 |
Cylinder Liner (Phenolic) |
12D40, 3D40 |
| 51572 |
C.P. 22015 |
Cylinder Liner (Phenolic) |
2D30 |
| 51573 |
C.P. 22015B |
Cylinder Liner (Phenolic) |
2B20 |
| 52595 |
C.P. 22046 |
Blade Thrust Bearing Retainer Assy (complete with 36 Rollers) |
D Shank Blades |
| 52595-2 |
N/A |
Roller, Blade Thrust Bearing |
D Shank Blades |
| 52771 |
See CP-22000 kit in STC section below |
Bearing Assembly, Counterweight Thrust |
2D30, 12D40, 2E40, 3D40 |
| 53213 |
See CP-22000 kit in STC section below |
Race, Counterweight Bearing (Inner) |
2D30, 12D40, 2E40, 3D40 |
| 53214 |
See CP-22000 kit in STC section below |
Retainer Assembly, Counterweight Bearing |
2D30, 12D40, 2E40, 3D40 |
| 53216 |
See CP-22000 kit in STC section below |
Race, Counterweight Bearing (Outer) |
2D30, 12D40, 2E40, 3D40 |
| 53546 |
See CP-22000 kit in STC section below |
Shaft, Counterweight Bearing |
2D30, 12D40, 2E40, 3D40 |
| 53599 |
See CP-22000 kit in STC section below |
Spacer, Counterweight Bearing Retainer |
2D30, 12D40, 2E40, 3D40 |
| 53666 |
C.P. 22037 |
Support Barrel (Phenolic) |
3D40 |
| 54486 |
HP-22066 |
Spider Ring (Phenolic) |
23D40 |
| 54531 |
HP-22063 |
Support, Barrel (Phenolic) |
23D40 |
| 54558 |
HP-22068 |
Spider Ring (Phenolic) |
22D40 |
| 54559 |
HP-22065 |
Support, Barrel |
22D40 |
| 54843 |
HP-22067 |
Spider Ring (Phenolic) |
22D30 |
| 55212 |
HP-22064 |
Support, Barrel |
22D30 |
| 56427 |
HP-22063 |
Support Barrel (Phenolic) |
23D40 |
| 62457 |
C.P. 22014-3 |
Counterweight Cap |
2D30 |
| 507670 |
C.P. 22045-2 |
Bearing Spacer |
D Shank Blades |
| 513934 |
C.P. 22045-1 |
Bearing Spacer |
D Shank Blades |
| 524278-0 |
C.R. 22050-0 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-10 |
C.R. 22050-10 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-15 |
C.R. 22050-15 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-20 |
C.R. 22050-20 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-25 |
C.R. 22050-25 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-30 |
C.R. 22050-30 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-35 |
C.R. 22050-35 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-40 |
C.R. 22050-40 |
Chafing Ring, D Shank |
D Shank Blades |
| 524278-5 |
C.R. 22050-5 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-0 |
C.R. 22050-0 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-10 |
C.R. 22050-10 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-15 |
C.R. 22050-15 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-20 |
C.R. 22050-20 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-25 |
C.R. 22050-25 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-30 |
C.R. 22050-30 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-35 |
C.R. 22050-35 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-40 |
C.R. 22050-40 |
Chafing Ring, D Shank |
D Shank Blades |
| 56369-5 |
C.R. 22050-5 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-0 |
C.R. 22050-0 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-10 |
C.R. 22050-10 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-15 |
C.R. 22050-15 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-20 |
C.R. 22050-20 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-25 |
C.R. 22050-25 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-30 |
C.R. 22050-30 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-35 |
C.R. 22050-35 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-40 |
C.R. 22050-40 |
Chafing Ring, D Shank |
D Shank Blades |
| 56370-5 |
C.R. 22050-5 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-0 |
C.R. 22050-0 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-10 |
C.R. 22050-10 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-15 |
C.R. 22050-15 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-20 |
C.R. 22050-20 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-25 |
C.R. 22050-25 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-30 |
C.R. 22050-30 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-35 |
C.R. 22050-35 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-40 |
C.R. 22050-40 |
Chafing Ring, D Shank |
D Shank Blades |
| 56371-5 |
C.R. 22050-5 |
Chafing Ring, D Shank |
D Shank Blades |
| 57660 |
HP-22062 |
Blade Bushing |
22D30, 22D40, 23D40, 24D50, 33D50, 43D50 |
| 70096 |
N/A |
Roller, Blade Thrust Bearing |
D Shank Blades |
| S8464 |
See CP-22019-1 kit in STC section below |
Gasket, Piston (Outboard) |
2D30 |
| S8480 |
C.P. 22025 |
Washer (Front Cone Packing) |
2D30 |
| S8482 |
C.P. 22017-0 |
Spider Ring (Phenolic) |
2D30 |
| S8482 |
C.P. 22017-1 |
Spider Ring (Phenolic) |
2D30 |
| S8491 |
C.P. 22125 |
Washer (Front Cone Packing) |
12D40, 3D40 |
| S8493 |
C.P. 22018-0 |
Spider Ring (Phenolic) |
12D40 |
| S8493 |
C.P. 22018-1 |
Spider Ring (Phenolic) |
12D40 |
| S8498 |
See CP-22019-2 kit in STC section below |
Gasket, Piston (Outboard) |
12D40, 3D40, 2E40, 3E50 |
| S8501 |
C.P. 22014-2 |
Counterweight Cap |
2D30, 12D40, 2E40, 3D40 |
| S8511 |
C.P. 22014-4 |
Counterweight Cap |
2D30, 2E40, 3D40, 3E50 |
| |
|
|
|
| STC - BLADE SEALS (CP-22040) |
| REPLACES: |
RSW Part No. |
Part Description |
Applicability |
| STC - Seals hub at blade opening to keep grease from slinging out of hub. |
C.P. 22040-D |
Blade Seal |
2D30, 12D40, 3D40 |
| 201/AA-490 |
Adhesive |
2D30, 12D40, 3D40 |
| Flat Stick |
Flat Stick |
2D30, 12D40, 3D40 |
| T250M9X2 |
Cable Tie |
2D30, 12D40, 3D40 |
| C.T. 37204 |
Blade Seal Installation Tool |
D Shank Blades |
| |
|
|
|
| STC - BLADE CUFF (BCMP-51) |
| STC |
BCMP-51 |
Blade Cuff |
P-51 Mustang |
| |
|
|
|
| STC - COUNTERWEIGHT BEARING AND SHAFT KIT (CP-22000) |
| REPLACES: |
RSW Part No. |
Part Description |
Applicability |
| STC - Replaces original counterweight bearing and shaft assembly. This is a very heavy duty system with a long service life. This assembly requires a one-time modification to the cylinder. This modification is free of charge with the purchase of a kit. |
C.P. 22000 |
Counterweight Bearing & Shaft Assy Kit |
2D30, 12D40, 2E40 |
| |
C.P. 22000-3D40 |
Counterweight Bearing & Shaft Assy Kit (3D40) |
3D40 |
| |
C.P. 22001-2 |
Counterweight Bearing Shaft Bushing |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22002-1 |
Counterweight Bearing Shaft |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22004-2 |
Counterweight Bearing Race (Outer) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-0 thru -30 (Total of 14 thrust washers) |
Starter Kit (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-0 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-5 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-10 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-15 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-20 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-25 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22005-30 |
Counterweight Bearing Shaft Thrust Washer (2 each) |
2D30, 12D40, 2E40, 3D40 |
| |
C.P. 22006 |
Counterweight Bearing Shaft Thrust Bearing Assy (matched set of 2) |
2D30, 12D40, 2E40, 3D40 |
| |
C.T. 37200 |
Cylinder Bushing Installation Tool |
All Counterweight Propellers |
| |
|
|
|
| STC - BLADE THRUST BEARING ASSEMBLY (CH-220032) |
| REPLACES: |
RSW Part No. |
Part Description |
Applicability |
| STC - This assembly allows blades with cracked, corroded, or worn blade thrust bearings to be put back into service. |
C.H. 220032 |
Blade Thrust Bearing Assy (consisting of inboard and outboard bearing races, support, and retaining ring) |
D Shank Blades |
| C.H. 220032 |
Blade Thrust Bearing Assy for large blades (over 50 # weight) |
D Shank Blades |
| |
|
|
|
| STC - PISTON CROWN ASSEMBLY (CP-22019) |
| REPLACES: |
RSW Part No. |
Part Description |
Applicability |
| STC - Replaces the original gasket and nut system with a reliable heavy duty assembly that is similar to the Little Giant but has a better seal system and more wall thickness. |
C.P. 22019-1 |
Piston Crown complete with seals |
2D30 |
| C.P. 22019-1S |
Piston Crown Seal (set of 3) |
2D30 |
| C.P. 22019-2 |
Piston Crown complete with seals |
12D40, 3D40, 3E50 |
| C.P. 22019-2S |
Piston Crown Seal (set of 3) |
12D40, 2E40, 3D40, 3E50 |
| C.T.37208 |
Piston Crown Installation Tool |
C.P.22019-1 (2D30) |
| C.T.37210 |
Piston Crown Installation Tool |
C.P.22019-2 (12D40) |
| |
|
|
|
| PROPELLER INSTALLATION TOOLS (Call us for custom tool orders) |
| M-1089 |
RSW-12D40-IW |
Propeller Installation Wrench |
12D40 |
| M-1088 |
RSW-2D30-IW |
Propeller Installation Wrench |
2D30 |
| HSP1483/54819 |
RSW-40-SPL |
Propeller Retaining Nut Wrench |
22D40 - 23D40 |
| HSP 59915 |
RSW-30-SPL |
Propeller Retaining Nut Wrench |
22D30 |
| HSP-346/59913 |
RSW-22D30/40-DW |
Dome Wrench |
22D30 - 22D40 |
| 59915 |
RSW-23D40-DW |
Dome Wrench |
23D40 |
| M-1087 |
RSW-2B20-IW |
Installation Wrench |
2B20 |
|
RSW Blade Cuffs
|
| |
RSW blade cuffs combine the best materials and processes with superb craftmanship. RSW cuffs are molded from an ultra-high durometer nitrile material which does not chip or admit moisture like other cuff systems of the past. This means your blade cuffs will still look great for years to come, and will not be a spawning ground for moisture and corrosion.
|
 |
| |
 |
|
 |
In addition to simply "looking cool," the extended and improved airfoil gives the prop more bite and efficiency, and improves ground cooling. RSW blade cuffs have been flying on race and museum aircraft since 2001.
|
|
RSW Blade Thrust Bearing
Don't throw away those blades!
If you have Hamilton Standard D-shank blades with broken, corroded, or under limit thrust bearings, they can be returned to service safely and reliably. The RSW blade thrust bearing replacement PMA has been around for almost 15 years and has proven to be a reliable and cost effective alternative to buying new blades.
 |
 |
| |
|
| Turn your junk into valuable inventory. |
|
RSW Counterweight Bearing & Shaft Kit - STC
|
| |
| The RSW Counterweight Bearing & Shaft Kit STC is an extremely rugged and proven alternative to the original Hamilton Standard kidney bearing. Our kits are manufactured with double stress-proof materials, plated, and coated with a self-lubricating topcoat. |
 |
| ´ |
´ |
 |
Premium materials and processing go a long way towards making reliable, long lasting parts, but the real secret to the success of our kits is with the redesigned bushing. The OEM assembly has a major design flaw with the bushing configuration. The OEM configuration has a very shallow bushing that is pressed into the aluminum cylinder. This is the first problem as there is simply not enough area contact between the cylinder and the bushing to keep it from 'wobbling" under stress. |
| |
|
|
| Then, to complicate matters even more, when the shaft is inserted and threaded into the cylinder, there is a portion of the shaft which is left completely unsupported. This is where the shafts traditionally break. OEM shaft breakage is a very common occurrence, especially when the propeller is not lubricated routinely. A broken shaft can be very dangerous. |
 |
| |
|
 |
In order to correct this original design flaw, RSW created an STC in which the bushings are redesigned to the correct strength and stress requirements for this configuration, and the RSW shaft is supported 100% by the bushing so there is no flex break point. |
| |
|
| This STC requires a minor modification to the cylinder. The bushing holes in the cylinder are drilled and tapped to accept the oversize bushings. This is not a difficult procedure and can be performed in most any shop, or the cylinders can be sent to RSW or one of our dealers for modification. |
 |
| |
|
| The RSW Counterweight Bearing & Shaft STC is quite simply the safest, most reliable, and durable system ever designed for the Hamilton Standard counterweight propellers. A search for service difficulties at the FAA web site will quickly show the quality difference over other systems. |
|
| Installation Instructions |
| |
| |
| Installation Instructions for the RSW CP22000 Counterweight Bearing & Shaft Kit |
| English .PDF format (534 KB) Right Click and 'Save Target As' to Download |
| |
| Instrucciones de Instalación para RSW CP22000 Kit de Tornillos y Cojinetes de Contrapesas (Counterweight Bearing & Shaft Kit) |
| Español .PDF format (534 KB) Right Click and 'Save Target As' to Download |
| |
| Installation Instructions for RSW CP22040-D Blade Seal |
| English .PDF format (700 KB) Right Click and 'Save Target As' to Download |
| |
| Instrucciones de Instalación para RSW CP22040-D Para las Botas de Base de Pala (Blade Seal) |
| Español .PDF format (700 KB) Right Click and 'Save Target As' to Download |
|
| Aviation Links |
| |
|
This e-mail address is being protected from spambots, you need JavaScript enabled to view it
Propeller and engine repair and overhaul services.
|
| |
Aero Recip (Canada) LTD.
Major overhauler of Pratt & Whitney R985, R1340 and R1830 radial engines, PZL M18 engines and all models of Lycoming and Continental opposed engines, cylinders and related accessories.
|
| |
|
This e-mail address is being protected from spambots, you need JavaScript enabled to view it
Agricultural aviation parts for engines, propellers, hardware and related accessories.
|
| |
|
|
| |
|
This e-mail address is being protected from spambots, you need JavaScript enabled to view it
Propellers and Accessories - Warbirds � Agricultural - Amphibian
|
| |
|
|
| |
|
Commemorative Air Force � Home of P-51 �Gunfighter�.
|
| |
Prop Works Propeller Systems Inc.
Sales, overhaul, and repair of Hartzell, Hamilton Standard, McCauley, and Sensenich propellers and overhaul and repair of governors and de-icing systems.
|
| |
|
|
|
|
|
